83
OTHER RECORDING FUNCTIONS
Creating Your Own BESTSHOT Setup
You can use the procedure below to save the setup of an
image you recorded as a BESTSHOT scene. After that,
you can recall the setup whenever you want to use it.
1.
Press [ ] (REC), and then select “
BESTSHOT” as the recording mode (page 48).
• This enters the BESTSHOT mode and displays a
sample scene.
2.
Use [] and [] to
display “Register
User Scene”.
3.
Press [SET].
4.
Use [] and [] to
display the image
whose setup you
want to register as a
BESTSHOT scene.
5.
Use [] and [] to select “Save”, and then
press [SET].
• This registers the setup. Now you can use the
procedure on page 81 to select your user setup for
recording.
To Next Page
Loading...
