OTHER RECORDING FUNCTIONS
123
Specifying Power On Default Settings
The camera’s “mode memory” feature lets you specify the
power on default settings individually for the BEST SHOT
mode, flash mode, focus mode, white balance mode, ISO
sensitivity, AF Area, metering, self-timer, flash intensity,
digital zoom mode, manual focus position and zoom
position. Turning on mode memory for a mode tells the
camera to remember the status of that mode when you turn
off the camera, and restore it the next time you turn the
camera back on. When mode memory is turned off, the
camera automatically restores the initial factory default
setting for the applicable mode.
— The following table shows what happens when you turn
mode memory on or off for each mode.
Select this setting:
On
Off
To do this:
Display guidance text when you
select an icon on the monitor screen.
Turn off Icon Help
3.
Use [왖] and [왔] to select the setting you
want, and then press [SET].
IMPORTANT!
• The icons listed below do not appear on the display
while Icon Help is turned off.
— Flash mode icon (page 71)
— Focus mode icon (page 82)
— White balance
AWB
icon (page 92)
To Next Page
Loading...
Need help?
General
