PLAYBACK
132
You can use the camera’s built-in monitor screen to view
images after you record them.
Basic Playback Operation
Use the following procedure to scroll through files stored in
the camera’s memory.
1.
Press [ ] (PLAY) to turn
on the camera.
• This enters the PLAY mode
and causes an image or a
message to appear on the
monitor screen.
PLAYBACK
2.
Use [왘] (forward) or [왗] (back) to scroll
through files on the monitor screen.
NOTE
• Holding down [왗] or [왘] scrolls images at high
speed.
• In order to allow for faster playback image scrolling,
the image that initially appears on the monitor screen
is a preview image, which is of somewhat lower
quality than the actual display image. The actual
display image appears a short while after the preview
image. This does not apply to images copied from
another digital camera.
PLAY mode file type Folder name/ File name
Image quality
Image size
Date and time
[ ]
To Next Page
Loading...
