APPENDIX
241
Power does not turn on.
Camera suddenly powers
down.
Image is not recorded
when the shutter button is
pressed.
1) The battery is not oriented correctly.
2) The battery is dead.
1) Auto Power Off activated (page 51).
2) The battery is dead.
1) The camera is in the PLAY mode.
2) Flash unit is being charged.
3) Memory is full.
1) Orient the battery correctly (page 38).
2) Charge the battery (pages 35, 40). If the battery
goes dead soon after being charged, it means
the battery has reached the end of its life and
needs to be replaced. Purchase a separately
available NP-20 rechargeable lithium ion
battery.
1) Turn power back on.
2) Charge the battery (pages 35, 40).
1) Press [
] (REC) to enter the REC mode.
2) Wait until the flash unit finishes charging.
3) Transfer files you want to keep to your
computer and then delete files from image
memory, or use a different memory card.
Power Supply
Image Recording
Symptom Possible Cause Action
Troubleshooting Guide
To Next Page
Loading...
Need help?
General
