OTHER SETTINGS
169
OTHER SETTINGS
Configuring Sound Settings
You can configure different sounds to play whenever you
turn on the camera, press the shutter button half-way or all
the way, or perform a key operation.
To configure sound settings
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Sounds”, and
then press [왘].
3.
Use [왖] and [왔] to select the sound whose
setting you want to configure, and then press
[왘].
4.
Use [왖] and [왔] to change the setting, and
then press [SET].
Select this setting:
Sound 1 through Sound 5
Off
To do this:
Select a built-in sound
Turn off the sound
To set the confirmation tone volume
level
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Sounds”, and
then press [왘].
3.
Use [왖] and [왔] to select “ Operation”.
4.
Use [왗] and [왘] to specify the volume setting
you want, and then press [SET].
• You can set the volume in the range of 0 (no sound)
to 7 (loudest).
IMPORTANT!
• The volume setting you make here also affects the
video output volume level (page 157).
To Next Page
Loading...
