GETTING READY
54
3.
Press [왗] or [왘] to select the tab you want,
and then press [SET] to move the selection
cursor from the tab to the settings.
4.
Use [왖] and [왔] to
select the feature
whose setting you
want to configure,
and then press [왘].
• Instead of pressing [왘],
you could also press
[SET].
5.
Use [왖] and [왔] to change the currently
selected setting.
Example: To select the
“Focus” item.
6.
Perform one of the following operations to
apply the setting you configured.
* In the case of easy Mode (page 63), pressing [왗] will
apply the setting and exit the setting screen without
returning to feature selection in step 4.
IMPORTANT!
• See “Menu Reference” on page 235 for more
information about menus.
• Entering the easy mode (page 63) changes display
contents to four menu items each, using larger size
characters. The easy mode also displays simple on-
screen help.
To do this:
Apply the setting and exit
the menu screen.
Apply the setting and
return to feature selection
in step 4*.
Apply the setting and
return to tab selection in
step 3.
Perform this key operation:
Press [SET].
Press [왗].
1. Press [왗].
2. Use [왖] to move back up to
tab selection.
To Next Page
Loading...
Need help?
General
