1. From the main menu, highlight the STAT icon
and press l. If any list contains data, highlight
any entry in the list and then press
u( ),
>
r(DEL-A), then q to delete all entries in that
list. Repeat for each list containing data. Press u(> )
to return to original menu options.
2. When all lists are cleared, label List 1 as TIME and
List 2 as HEIGHT by first pressing B to scroll to the
SUB row. Then press La(A-LOCK) to activate
Alpha-lock. Using the red letters at the top right of
each key, type the titles. Press l after each title.
3. Enter the data from the table into the lists, pressing
l after each entry.
4. Press
q(GRPH) and then choose u (SET). (If
q(TOOL) is visible instead of q(GRPH), then press
u( ) first.) >
5. Set the screen as shown on the right. When done,
press d. Then press q (GPH1).
To Next Page
Loading...
