2. When all lists are cleared, label List 1 as HEIGHT and
List 2 as SPAN by first pressing B to scroll to the
SUB row. Then press La(A-LOCK) to activate
Alpha-lock. Using the red letters at the top right of
each key, type the titles. Press l after each title
.
3. Enter the data from the table into the lists, pressing
l after each entry.
4. Press p. From the main menu, highlight the
RUN•MAT icon and press l.
5. Enter the ratio of arm span to height into List 3 by
pressing L1(List)2ML1(List)1b
L1(List)3.
6. To determine the average ratio, determine the average
of List 3 by entering iq(LIST), u(> ),e(Mean).
Press
u(> ),u( ), q(List)3kl. >
To Next Page
Loading...
