Results:
(110, 7310), (200, 8800), (290, 9310). Specify Fix 3 (three decimal places)
for results.
(SETUP) (STAT) (OFF)
(SETUP) (Fix)
(STAT) (A+BX)
20 110 200 290
3150 7310 8800 9310
(STAT) (Reg) (r)
0.923
(STAT) (Type) (ln X)
(STAT) (Reg) (r)
0.998
(STAT) (Reg) (A) -3857.984
(STAT) (Reg) (B) 2357.532
Linear Regression Correlation Coefficient: 0.923
Logarithmic Regression Correlation Coefficient: 0.998
Logarithmic Regression Formula: y = -3857.984 + 2357.532lnx
Calculating Estimated Values
Based on the regression formula obtained by paired-variable statistical
calculation, the estimated value of y can be calculated for a given x-value.
The corresponding x-value (two values, x
1
and x
2
, in the case of quadratic
regression) also can be calculated for a value of y in the regression
formula.
Example 4: To determine the estimate value for x when y = -130 in the
regression formula produced by logarithmic regression of the data in
Example 3. Specify Fix 3 for the result. (Perform the following operation
after completing the operations in Example 3.)
130 (STAT) (Reg) (xˆ)
4.861
Important!
• Regression coefficient, correlation coefficient, and estimated value calculations can
take considerable time when there are a large number of data items.
Performing Normal Distribution Calculations
While single-variable statistical calculation is selected, you can perform
normal distribution calculation using the functions shown below from the
54
To Next Page
Loading...
Need help?
General
Weight and Dimensions
