3-8
k Accessing the List Data Manipulation Function Menu
All of the following examples are performed after entering the Run-Matrix mode.
Press K and then 1(LIST) to display the list data manipulation menu, which contains the
following items.
• { List } / { Lst → Mat } / { Dim } / { Fill( } / { Seq } / { Min } / { Max } / { Mean } / { Med } / { Augment } / { Sum } / { Prod } /
{ Cuml } / { % } / { ΔList}
Note that all closing parentheses at the end of the following operations can be omitted.
u To transfer list contents to Matrix Answer Memory [OPTN]-[LIST]-[Lst→Mat]
K1(LIST) 2(Lst → Mat) 1(List) <list number 1 - 26> ,1(List) <list number 1 - 26> ...
,1(List) <list number 1 - 26> )w
• You can skip input 1(List) in the part of the above operation.
• All the lists must contain the same number of data items. If they don’t, an error occurs.
Example: List → Mat (1, 2) w
Example To transfer the contents of List 1 (2, 3, 6, 5, 4) to column 1, and the
contents of List 2 (11, 12, 13, 14, 15) to column 2 of Matrix Answer
Memory
AK1(LIST) 2(Lst → Mat)
1(List) b,1(List) c)w
u To count the number of data items in a list [OPTN] - [LIST] - [Dim]
K1(LIST) 3(Dim) 1(List) <list number 1 - 26> w
• The number of cells a list contains is its “dimension.”
Example To count the number of values in List 1 (36, 16, 58, 46, 56)
AK1(LIST) 3(Dim)
1(List) bw
To Next Page
Loading...
Need help?
General
