Casio fx-CG50 - Page 644

ε-30
Starting a Sampling Operation
• The screen shown below appears when CH1~3,
SONIC, or Mic is used as the trigger.
• Time-based Sampling: Interval of 5min or greater
Pressing 1 advances to “4. Graphing”. Pressing w there returns to “3. Sampling”.
Sampled values are saved as Current Sample Data.
Graph screen does not show all sampled values, but only a partial preview.
•
Mic & Speaker Mode: Speaker - Sample Data
The following three graph types can be produced when Photogate -Pulley is being used.
1.
Time and distance graph
2.
Time and velocity graph
3.
Time and acceleration graph
Sample values are stored as List data only.
S
tarts Samplin
g
Starts Sampling
w1
w
• When Number of Samples = 1
•
When Number of Samples > 1
Input values. w
Mode Time-based Sampling Fast Sampling Mic & Speaker Mode Period Sampling
1. Data Logger Setup
2. Start Standby 3. Sampling 4. Graphing
w
• The screen shown below appears when CH1~3,
SONIC, or Mic is used as the trigger.
• Time-based Sampling: Interval of 5min or greater
Pressing 1 advances to “4. Graphing”. Pressing w there returns to “3. Sampling”.
Sampled values are saved as Current Sample Data.
Graph screen does not show all sampled values, but only a partial preview.
•
Mic & Speaker Mode: Speaker - Sample Data
The following three graph types can be produced when Photogate -Pulley is being used.
1.
Time and distance graph
2.
Time and velocity graph
3.
Time and acceleration graph
Sample values are stored as List data only.
S
tarts Samplin
g
Starts Sampling
w1
w
• When Number of Samples = 1
•
When Number of Samples > 1
Input values. w
Mode Time-based Sampling Fast Sampling Mic & Speaker Mode Period Sampling
1. Data Logger Setup
2. Start Standby 3. Sampling 4. Graphing
w