To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if text has too many lines to fit on tape using my Casio Label Maker?
If your Casio Label Maker displays that the text has too many lines to fit on the tape, reduce the number of lines.
What to do if the text is too long for the tape length on my Casio KL-7000 Label Maker?
If the text is too long to fit the specified tape length on your Casio Label Maker, reduce the size of the characters or shorten the text.
Why is there no display on my Casio KL-7000?
If your Casio Label Maker's display is blank when you turn it on, there could be several reasons: * The contrast may be set too low; try adjusting the contrast dial. * The batteries might be dead; replace them with new ones. * The batteries may not be correctly installed; ensure they are loaded properly. * If using an AC adapter, it may not be properly connected; make sure it is securely plugged in.
What to do when my Casio KL-7000 Label Maker memory is full?
If your Casio Label Maker's memory is full, delete data you no longer need to create space for new data.
What to do if there is not enough unused memory on my Casio KL-7000 Label Maker?
To address the issue of insufficient memory on your Casio Label Maker, reduce the size of the data you are trying to store, or delete data already stored to make room for the new data.
What to do if my Casio KL-7000 tape does not cut?
If the tape cutter on your Casio Label Maker is not cutting, the tape cutter may be dull or damaged. Take your Label Printer to an authorized CASIO service provider to have the cutter replaced.
What does it mean when my Casio KL-7000 Label Maker says battery power is low?
If your Casio Label Maker indicates low battery power, replace the batteries or use an AC adapter.
Why is the ink ribbon coming out with the tape on my Casio KL-7000 Label Maker?
If the ink ribbon is coming out with the tape on your Casio Label Maker, remove the tape cartridge and take up any slack in the ink ribbon, being careful not to break it. Then, reload the tape cartridge. If the ink ribbon breaks, load a new tape cartridge.
Why doesn't the tape from my Casio KL-7000 stick?
If the tape from your Casio Label Maker isn't sticking, make sure you remove the paper backing from the tape.
What to do if tape comes out but nothing is printed on my Casio KL-7000?
If your Casio Label Maker is feeding tape but not printing anything, check to see if you have only input blank spaces. Input other text.
General| Brand | Casio |
|---|---|
| Model | KL-7000 |
| Category | Label Maker |
| Language | English |
Crucial safety guidelines and warnings to ensure proper and safe operation of the label printer.
Details power sources, battery replacement, AC adapter usage, and powering on/off.
Procedure to reset memory and instructions for loading tape cartridges.
Basic input of letters/numbers and use of the CODE key for special characters.
Explains cursor navigation and methods for deleting individual characters.
How to delete multiple characters and clear text using the CLS function.
Explains the difference and usage of overwrite and insert modes for text input.
Ways to set character attributes like font, style, and size before, during, or after input.
How to change attributes and apply text effects to text ranges.
Important precautions before printing and basic steps to print text onto tape.
Procedure to clean printer parts and reset the unit in case of malfunction.
Common problems, their causes, and solutions for the label printer.
Explains various messages displayed by the printer and their meanings.
