E-17
Playing Back Built-in Songs
IMPORTANT!
• After you select a built-in song, it can take a number of 
seconds for the song data to be loaded. While the data is 
being loaded, the song number will flash on the display, 
and the keyboard keys and button operations will be 
disabled. If you are playing something on the keyboard, 
the following operation will cause output to stop.
Your digital piano has a total of 72 built-in songs. You 
can use the procedure below to play back all of the 
songs, one after the other.
1.
While holding down the MUSIC LIBRARY 
button, press the PLAY/STOP button.
• This will start playback of the 72 built-in songs in 
sequence, from t.01 through L.60.
• You can play along with a song on the keyboard 
during all-song playback. The tone assigned to the 
keyboard is the one that is preset for the song that is 
playing.
• You can use the  /NO and  /YES buttons to skip 
sequentially between songs during all-song playback.
• If you press a TONE button, playback will jump to 
the demo song that uses that tone. If you press the 
MUSIC LIBRARY button during all-song playback, 
playback will jump to Music Library song L.01.
• Pressing the  /NO and  /YES buttons at the same 
time will jump to main tone demo song t.01.
2.
Press the PLAY/STOP button to stop all-song 
playback.
PART/TRACK
/NOPLAY/STOP
MUSIC LIBRARY
/YES
REW
FF
Playing Back All of the Built-in 
Songs
Type
Number of 
Songs
Display Indicator
Main Tone 
Demo Song
12
The TONE button of the 
main tone being used flashes, 
and the demo song number is 
on the display.
Music 
Library Song
60
The Music Library lamp 
flashes and the song number 
is displayed.
PX200_e.book  17 ページ 2006年10月13日 金曜日 午後12時5分