– 14 –
V-R200 / VER.2
1-2.
Installing the Test Application
To be prepared
0
Flash memory (USB memory or SD card)
0
Test application “FuncTest843_0100000003.apk”
1
Store the test application “FuncTest843_0100000003.apk” to the root directory of the fl ash memory (USB
memory or SD card).
2
Tap “Settings”
I
“Security”, and check the “Unknown sources” box.
3
Insert a fl
ash memory and tap “Open Manager”.
4
Tap “SD Card 1 OR USB Storage 1”
I
“FuncT
est843_0100000003.apk”.
O R
5
T
ap “Next”
I
“Install”.
After completion of installation, tap either “Done” or “Open”.
6
Remove the fl ash
memory.
Tap “Settings”
I
“Storage”, unmount the fl
ash memory to allow safe removal, and then remove it.
To Next Page
Loading...
Need help?
General
