17
Getting Started with Your Phone
Removing and inserting a microSD card
To expand the memory of your device, you can insert a microSD card in
the phone.
Removing a microSD card
Warning!
• The microSD card is very small. Make sure you do not drop it.
• Failure to completely reseal the back cover after removal may result
in damage if the phone is exposed to water.
• Do not touch the microSD card terminal with your finger or hand. It
can contaminate the terminal and cause contact failure.
1. Remove the back cover and the battery.
(For instructions on how to remove the back cover and the battery,
refer to steps 1 through 4 of “Inserting and removing the battery”
beginning on page 13.)
2. Insert the microSD card with the logo facing
up and slide it into place until fully inserted.
3. Remove the microSD card from the
microSD card slot by gently pressing in to
release the lock, then carefully pull the card
out.
To Next Page
Loading...
Need help?
General
