61
4.
To reflect “Network Settings” page changes on the projector, click [Apply].
z A dialog box will appear telling you that you need to restart the projector in order to reflect the
settings.
5.
To restart the projector and reflect the changed settings, click [OK].
z To cancel projector re-start without changing settings, click [Cancel] instead of [OK].
z Clicking [OK] will reflect the changed settings and restart the projector. The LAN connection
between the projector and computer will be terminated at this time.
Connect the projector to an external
wireless access point
In the “External Access Point” area, click “Enable” and configure settings
as required.
For details, see step 6 through 9 under “To connect the projector to a
wireless LAN access point” (page 30).
Do not connect the projector to an
external wireless access point
In the “External Access Point” area, click “Disable”.
To do this: Perform this operation:
To Next Page
Loading...
Need help?
General
