71
This section explains the button operations you can use on a computer web browser to perform
projector File Viewer operations.
Displaying the Viewer Control Page
If there is a wireless LAN connection between the projector and a computer, you can perform a
Network Connection operation on the computer to display the “Viewer Control” page without inputting
a password.
With an XJ-M Series projector, you can directly log in to the “Viewer Control” page over a wired LAN
without using Network Connection.
To display the Viewer Control page over a wireless LAN
connection
1.
Perform one of the operations below to connect a computer to the projector via
a wireless LAN.
z “To use a projector simple connection SSID to establish a wireless LAN connection and
project” (page 12), steps 1 through 9
z “To use a projector generic SSID to establish a wireless LAN connection and project” (page
15), steps 1 through 11
z “To use a user SSID to establish a wireless LAN connection and project” (page 22), steps 1
through 11 (User SSID already created).
2.
On the Network Connection window, click the function menu button and then
click [Admin Screen] on the menu that appears.
z This starts up the computer’s web browser and displays the projector’s top page.
Projector File Viewer Operations
Function menu button
To Next Page
Loading...
Need help?
General
