Casio XJ-S35 - Enabling and Disabling Web Setup

67
4
Click the [Change] button.
z If you input all of the required information correctly, your password will be changed and
the Web Setup top page will reappear.
Enabling and Disabling Web Setup
This section explains how you can disable the Web Setup page so it is not displayed
when you perform Data Projector operations. You can disable the Web Setup page when
you want to restrict access to Web Setup while there are multiple computers connected to
the Data Projector.
To enable and disable Web Setup
1
While Wireless is shown in the projection area, press the [MENU] key on the
Data Projector’s remote controller.
z This will display the setup menu.
2
Press the [T] key to move the highlighting to “USB” and then press the
[ENTER] key.
3
Press the [T] key once to move the highlighting to “Setup” and then press the
[ENTER] key.
z This will display the Wireless setup menu.
4
Press the [T] key to move the highlighting to “Web Setup”.
5
Use [X] and [W] to select “Enable” or “Disable”.
z Selecting “Disable” will make it impossible to access the Web Setup page from any
computer.
6
To exit the Wireless setup menu, press the [ESC] key.