Casio XJ-S35 - Assign a User Name to a Computer for Projection; Specifying the Quality of Images Sent from a Computer

79
3
Click the “Profile Name” down arrow button and then select the connection
profile you want to delete from the menu that appears.
4
After the settings are the way you want, click the [Delete] button.
5
To close the connection profile switching dialog box, click the [Close] button.
z This will return to the Wireless Connection window.
Assign a User Name to a Computer for Projection
User names make it possible to identify each computer when multiple computers are
connected to the Data Projector at the same time. The user name assigned to a computer
will appear in the projection area when the computer’s screen contents are projected. Use
Wireless Connection to assign a user name to each computer.
To assign a user name to a computer for projection
1
On the Wireless Connection window, select “Options” on the “Tools” menu.
z This will display a dialog box for configuring the option setting.
2
In the “User Name” box, enter the user name for the computer.
z Input up to 10 characters.
3
Click the [OK] button.
z This will register the user name.
Specifying the Quality of Images Sent from a Computer
Use the procedure below to specify the quality of images you send from a computer. The
“High-quality” setting provides better image quality, while the “Normal-quality” setting makes
the send operation faster.
To specify image quality
1
On the Wireless Connection window, select “Options” on the “Tools” menu.
z This will display the [Options] dialog box.
2
Under [Quality], select the quality setting you want.
3
When the setting is the way you want, click [OK].
z This will apply your setting.