88
When you establish a wireless LAN connection between the Data Projector
and a computer, it takes a log of time before the contents of the computer
screen is projected.
It can take some time for a wireless LAN connection to be established between the Data
Projector and computer if any other network connection besides the wireless network
connection used by the YW-2 wireless adapter is enabled on the computer. If this
happens, perform the following steps to disable the other network connections.
1
On the Windows Control Panel, click “Network Connections” (“Network and Dial-
up Connection” in the case of Windows 2000).
z This will display a “Network Connections” window (“Network and Dial-up Connection”
window).
2
On the window, right click any wireless network connection that is not the one
being used by the YW-2 wireless adapter, and then click “Disable” on the
shortcut menu that appears.
z The wireless network connection used by the YW-2 wireless adapter is the one with the
adapter name “CASIO 802.11b/g Wireless LAN USB Adapter (3887A)”. Disable all
wireless network connections that have any other name.
3
If you see a “Local Area Connection” on the window, right-click its icon and
then click “Disable” on the dialog box that appears.
To Next Page
Loading...
