46
To project a PDF file
1.
On the File Viewer main screen, select “PDF Viewer” and then press the [ENTER]
key.
This displays a list of PDF files.
2.
Use the [] and [] keys to select the PDF file you want to open and then press
the [ENTER] key (or [R] key).
This will open the selected PDF file.
3.
Perform page change, zoom, and other operations as required.
The following operations are supported during PDF file projection.
4.
To return to the file menu, press the [ESC] key.
5.
To return to the main screen, press the [FUNC] key and then the [ENTER] key.
To do this: Perform this operation:
Go to the previous page Press the [] or [S] key.
Go to the next page Press the [] or [T] key.
Adjust the image to the
screen width
Press the [FUNC] key. On the menu that appears, select “Adjust to Screen
Width” and then press the [ENTER] key.
Return to a full page view Press the [FUNC] key. On the menu that appears, select “Show Entire
Page” and then press the [ENTER] key.
Select a page from a
thumbnail list and display it
1. Press the [FUNC] key.
2. On the menu that appears, select “Page Selection” and then press the
[ENTER] key.
3. Use the cursor keys to select the thumbnail of the page you want to
display and then press the [ENTER] key.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
