NOTICE TECHNIQUE V2 LIMPIDO-PRO
CCEI
page 5
Filtration clock programmed between LIMPIDO clock programmed
10:00 and 16:00 and between between 10:00 and 12:00 and
18:00 and 21:00 18:00 and 20:00
At the end of a filtration period, the LIMPIDO also stops immediately (however its
clock continues normally) but its control box memorizes the position of the
electrolysis unit within the cycle, and the next time that a filtration period is started,
the LIMPIDO resumes its cycle at exactly the position at which it was interrupted.
The main advantage of this operating method is that it guarantees absolutely
identical normal and inverse production times in all cases (even in the case of a
power failure), and consequently assures the user that scale elimination in his unit
will be optimized (to guarantee production quality and durability of the
equipment).
The electrolytic cell
The cell is an essential element of the LIMPIDO and must be handled with care.
The cell is equipped with electrodes composed of solid titanium plates treated with
ruthenium oxide. It is specially designed to maximize life and to restrict maintenance
operations.
The Flowmeter
The flowmeter delivered with LIMPIDO 100 prevents the electrolyser from functioning
when water is not circulating and during back-washing. This prevents any build up of
hydrogen or overheating, ensuring the unit remains safe.
To Next Page
Loading...
