17
When a wash programme is in progress, the programme can be
paused by pressing the ‘Start / pause’ button at any time (unless key
lock is active - page 19). To resume the programme, press the ‘Start /
pause’ button again.
Programme selection
To select a programme, turn the ‘Programme selector dial’ to the
required programme, as detailed in the programme listing on page
13 and also on the detergent dispenser. The display will show the
programme duration.
Spin speed selection
Each selected programme has its own preset spin speed, as shown in
the programme listing on page 13.
If you press the ‘Spin speed button’ the currently set spin speed will
show on the display. You can reduce this or switch it o completely
if required by pressing the ‘Spin speed button’ a number of times. If
you miss the speed you want you can come back round to it again by
pressing a few more times.
Wash temperature selection
Each selected programme has its own preset wash temperature, as
shown in the programme listing on page 13.
If you press the ‘Temperature selection button’ the currently set
temperature will show on the display. You can change the wash
temperature if required (and available) by pressing the ‘Temperature
selection button’ a number of times. If you miss the temperature you
want you can come back round to it again by pressing a few more
times.
To Next Page
Loading...
Need help?
General
