19
running, the indicator light stays on. If this is pressed again while
the machine is running a programme the washer will pause and the
indicator light will flash.
Key lock
The lock function ensures that the programme will not be aected if
any buttons are pressed accidentally. Only the on/o button remains
active.
The lock function should be activated after the wash programme has
been selected.
To activate the key lock, press and hold ‘Temperature selection’ and
‘Spin speed’ buttons together for approximately three seconds.
To deactivate the key lock, press and hold ‘Temperature selection’
and ‘Spin speed’ buttons together again for approximately five
seconds.
Power cuts
• If there is a power cut, when the electricity comes back on the
washing programme will continue to run from where it stopped.
To Next Page
Loading...
