Instruction Manual | 13
lights up on the display. When the countdown is complete you will hear a
beep, which you can mute by pressing any button (touch sensor).
The appliance will not enter standby until minute minder countdown is
completed and beeping alarm is acknowledged.
Oven door
Oven door must be closed during operation. Heating elements are
disconnected when you open the door. If the door is open for more than 60
seconds, you will hear an acoustic signal alerting you to an open door. Touch
any button (touch sensor) or close the door to silence the alarm. Opening
the door does not aect any temperature or time settings, however if the
door remains open for more than 10 minutes, the appliance cancels
all programmes.
Limit the operating time
For safety reasons, the oven operation is time limited. If the set temperature
is up to 100°C, the oven will enter the Standby mode after 10 hours, and
if the set temperature is 200°C or more, the oven operation is limited to
3 hours. In the temperature range of 101°C to 199°C, the operation time is
limited proportionally between 3 and 10 hours.
Activate a heating function
Turn the function selector knob from 0 to the desired position to activate
a heating function. When you set the Function Selector knob to a heating
function, the display will show the default temperature for a function, such as
170C.
The displayed temperature flashes (with reduced brightness) and the C
indicator lights up steadily. The value changes when you turn the function
selector knob. When you touch the sensor , the oven activates. After
10 minutes of inactivity, the oven deactivates. Press the button (touch
sensor) to set up timed delayed operation.
To Next Page
Loading...
Need help?
General
