12 | Instruction Manual
Operation
You can use any baking or cleaning function available on the Function
Selector knob. Auto-o: When minute minder or any timed delayed, timed or
cleaning programme is completed, the appliance enters the standby mode
even if the function selector knob is set to 0.
Lighting
The appliance automatically controls oven light. By default the oven light is
on. The oven light is o:
• When 0, Pyrolytic cleaning or ECO is selected
• When the oven cavity temperature exceeds 300°C
• During pyrolytic cleaning and cooling
• Before and after the timed and timed delayed operation
• In standby mode, if the Function Selector knob is set to a position other
than 0
Cooling fan
Cooling fan operates independently of the set functions and the appliance
mode of operation. Cooling fan turns on when the oven cavity temperature
exceeds 80°C and turns o when it fall below is below 75°C.
Thermostat
The thermostat symbol indicates that the heating elements operate. If
any of the heating elements operates, the indicator lights up. The indicator
goes out, if none of the heating elements operates (e.g. when the oven
reaches the desired temperature and the heating elements are disconnected
until the temperature drops).
Minute Minder
Touch the button (touch sensor) in any mode to use minute minder.
Press to display countdown progress or
0.00
if minute minder is not
active, the indicator will flash.
Turn the +/– knob to adjust the Duration and press to confirm or simply
wait 5 seconds. When the minute minder is counting down, the indicator
To Next Page
Loading...
Need help?
General
