Instruction Manual | 21
Keeping your oven clean and well maintained helps to prolong its life. It is
important that, before any cleaning or maintenance is performed, you switch
o the oven at the mains supply. Do not start any cleaning or maintenance
until the oven has been allowed to cool completely.
Pyrolytic cleaning
The oven heats up to a temperature of about 480°C. To ensure safety, the
door remains locked for the entire duration of the process. If you must open
the door, use the emergency door opening procedure.
Important! Remove all accessories from the oven (baking
trays, drying grates, side racks, telescopic runners). Accessories left
inside the oven will be irreversibly damaged during the pyrolysis
cleaning.
Before pyrolytic cleaning
• Remove stubborn stains from the oven chamber.
• Clean the outside of the oven with a damp cloth
• Follow the instructions
During the cleaning process
• Do not leave the cloth near the hot oven
• Do not use the hob
• Do not turn on the oven lighting
• The oven door is equipped with a lock which prevents it from being
opened during the cleaning process
• Do not open the door so as not to interrupt the cleaning process
Important! During the pyrolytic oven cleaning process the oven
chamber can reach a very high temperature. Consequently, the
appliance outer surfaces can heat up more than usual, so keep
children away at all times. Some fumes can be emitted during the
cleaning, so make sure the kitchen is well ventilated.
Cleaning and maintenance
To Next Page
Loading...
Need help?
General
