22 | Instruction Manual
The pyrolytic cleaning process
• Close the oven door
• Follow the instructions in the section
• Pyrolytic cleaning
Important!
If the oven temperature is high (higher than in normal use) the door
will not be unlocked. Once the oven cools down, you can open the
door and remove the ash with a soft, damp cloth. Replace the side
rail and other accessories. Your oven is ready for use.
Door removal
In order to obtain easier access to the oven chamber for cleaning, it is
possible to remove the door. To do this, tilt the safety catch part of the hinge
upwards (fig. A). Close the door lightly, lift and pull it out towards you. In
order to fit the door back on to the cooker, do the inverse.
When fitting, ensure that the notch of the hinge is correctly placed on the
protrusion of the hinge holder. After the door is fitted to the oven, the safety
catch should be carefully lowered down again. If the safety catch is not set it
may cause damage to the hinge when closing the door.
A
Lifting the hinge safety catches
To Next Page
Loading...
