18 | Instruction Manual
The indicator is displayed and pyrolytic cleaning starts for 2.00 – 2.30 –
3.00 hours, depending on the Duration you have set.
The appliance displays duration time left until pyrolytic cleaning completes.
One hour before pyrolytic cleaning completes, the heaters are
disconnected, the temperature
---C
is displayed and the appliance
starts cooling down. The door is unlocked when temperature is less than
150°C. The indicator is o when the door is unlocked. The pyrolytic
cleaning programme ends, but you cannot continue cooking.
No settings can be changed during the pyrolytic cleaning and you cannot
continue cooking with these settings, however you can view current settings
and temperature. When you silence the alarm, the appliance always enters
standby mode.
Note: The oven door is equipped with a lock, which prevents it from being
opened during the cleaning process. Do not open the door so as not to
interrupt the cleaning process. If there is a short power outage during
pyrolytic cleaning the appliance starts cooling down and eventually unlocks
the door.
If you interrupt the pyrolytic cleaning by turning the function selector knob
to another position (such as 0), the appliance starts cooling down and
eventually unlocks the door. When the door is unlocked the appliance
switches to standby. If during pyrolytic cleaning you open the door before
it is locked, there will be an [open door] beep and pyrolytic cleaning is
aborted. Before starting the pyrolytic cleaning, please see "Cleaning and
Maintenance."
Using the Airfry tray
Your oven comes with an Airfry tray. For best results, select the fan
cooking function ( ) and place the Airfry tray on the 3rd shelf rack with
a tray on a shelf below.
To Next Page
Loading...
Need help?
General
