Instruction Manual | 27
Installation
The installation and technical assistance must only be performed by
qualified sta. Carefully read the safety instructions in this manual before
using the oven. Incorrect installation, maintenance, assistance and use can
cause serious damage/injury to persons or objects.
This product must be installed as instructed in this manual and in
compliance with National Standards and local regulations in force. Do not
lift or pull the oven from the door handle and do not force or load weights
when this is open. The purchaser is responsible for installation. Assistance
provided by the manufacturer due to incorrect installation is excluded from
the warranty.
Features of the cabinet
• The kitchen area should be dry and aired and equipped with ecient
ventilation
• When installing the oven, easy access to all control elements should be
ensured
• The cabinet and its components must be able to withstand temperatures
of up to 90 °C without presenting deformities and/ or surface defects
• The cabinet must enable the free passage of the oven connections
• All household kitchen units must be protected with fireresistant material
in accordance with the standards in force
• Hoods should be installed according to the manufacturer’s instructions
Inserting the oven in the cabinet
• Make an opening with the dimensions given in the diagram for the oven
to be fitted
• Make sure the mains plug is disconnected and then connect the oven to
the mains supply
• Insert the oven completely into the opening without allowing the four
screws in the places shown in the diagram to fall out
• Ensure the oven is safely installed inside the cabinet
• Use screws to fix the oven to the front face of the cabinet
To Next Page
Loading...
Need help?
General
