cec DA5 - Installation and Setup for USB Drivers on Windows PC; Introduction to USB Driver Setup; Driver Download Site; USB Driver Description

To Next Page

To Previous Page

D/A CONVERTER / USB SOUND SYSTEM DA5

Introduction

Installation and Setup

for USB Drivers

on Windows PC

The USB Interface equipped with DA5 is compatible to USB 2.0 audio device.

It is necessary for Windows PC users to install special driver for PCM music ﬁ les, which is

possible to download from the CEC home page.

When ASIO and DSD drivers are installed to a freeware PC music player, foobar2000, DSD

ﬁ les may be reproduced. This is to explain on how to install and set up those drivers using

foobar2000.

Compatible OS: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10

Mac PC (X10.6.8 or newer) are already equipped with a standard driver for USB 2.0 audio

device, and it is not necessary to install CEC speciﬁ c driver.

Download site

Windows users may access to download this speciﬁ c driver at CEC home page.

ṳ

http://www.cec-web.co.jp/service/download/driver/index_ex.html

Note: It is not abnormal to see SECURITY WARNING upon downloading and/or

installation. You may continue to download and/or install according to the

instructions by OS or Browser.

USB Driver (Your PC recognizes DA5 as a regular audio device.)

ṳᴾ

BRAVO-HD (is the USB driver specialized in DA5, supplied by SAVITEC, USB Audio

IC manufacturer.)

Necessary components to reproduce DSD ﬁ les at foobar2000

ṳ

foo_out_asio_v2p1p2.fb2k-component (ASIO driver by foobar 2000)

ṳᴾ

ASIOProxyInstall-0.7.2.exe (driver for the reasonable connection between ASIO and

DSD)

ṳ

foo_input_sacd.fb2k-component (DSD driver by foobar 2000)

Note: The above are the possible components publicized on our internet. Updated

version at DA5 might not be assured.

Note: Freeware PC-music player foobar2000 can be downloaded at:

http://www.foobar2000.org/