D/A CONVERTER / USB SOUND SYSTEM DA5
26
1.8. After the computer restarted connect with DA5 via USB cable.
1.9. Turning on DA5 the computer will recognize DA5 as CEC DA5 HS USB Audio
and automatically apply it to the output device. You can check the setting through
control panel - sound and audio device property. If not select DA5 as output device.
1.10. Starting a PC-music after selecting the USB input on DA5 you can listen to the
playback music through the analog and/or headphones output on DA5.
ṳ
DA5 USB input is compatible with up to 32bit/384kHz PCM signal but the sampling
frequency may be limited by the PC system setting or PC-Music player.
ṳ
Refer to "BRAVO-HD Control Panel" after completing "Installation and Setup for DSD
playback".
Note: You can delete the downloaded "da5_usb_win.zip" file and the saved
"da5_usb_win" folder with fi les after the installation fi nished.
Ex. WindowsXP Ex. Windows7
USB Driver Installation
To Next Page
Loading...