D/A CONVERTER / USB SOUND SYSTEM DA5
38
Ex. Playback after changing the bit rate and
buffer size during stop will show the new
settings.
Note: Bit rate setting should be the same as or
more than playback file. Otherwise the bit rate
for output is less than the original.
Note: By smaller buffer size setting against a
higher resolution music file a continuous noise
on music from the beginning, pop noise or
interruption may happen. In that case set the
buffer size bigger and restart.
4. PCM, bit rate, sampling frequency and buffer
size of a current PCM playback via ASIO like
a foobar2000 output setting are displayed.
BRAVO-HD Control Panel
To Next Page
Loading...