Chapter 6 –Clone SIM ID
User Manual 25
3. Insert Source SIM
Insert the SIM card that you wish to
clone, with the gold side facing down
and the cut corner facing outwards.
The slot for the SIM card is located at
the bottom of the UFED device.
4. Select Partition to Read
If the card is a 3G SIM card, you will
next be asked to choose the partition
Use the ▲▼ keys to move between
options. Press OK or ► to continue.
5. Insert Target Card
The UFED device now reads data from
the source SIM card, storing it in its
internal memory.
The UFED then asks you to insert the
target card. Insert the UFED SIM ID
blank card and press ► to continue.
To Next Page
Loading...