18
Methods
Classic Method
Classic methods are methods developed by CEM for specific applications. These methods can be copied and
edited, if desired. Refer to “Copying a Method,” “Editing a Method,” or “Performing a Method” sections in
this manual for additional information. All methods will appear in both Classic and One Touch Methods.
One Touch Methods
One Touch Methods are intended for customers who wish to extract a batch of 24 samples, consisting of two
complete 12-position racks using the same method.
1. 24 Sample Batch
1.1 Select the desired method. That method will load a batch of 24 samples.
1.2 To view positions 13-34, select the right arrow “>,” Select the left arrow “<” to return to
positions 1-12.
1.3 Positions can be individually deselected if desired. To deselect a method, select and hold the
position number.
To Next Page
Loading...
