What to do if the CEM liberty displays a Waste Full Error?
If the CEM Laboratory Equipment shows a 'Waste Full Error', try these steps: First, empty the waste container. Then, make sure the sensor is not engaged (it should be in the up position).
How to fix Nitrogen Pressure Errors in CEM liberty Laboratory Equipment?
To resolve Nitrogen Pressure Errors in CEM Laboratory Equipment, first, ensure the nitrogen source is working correctly. Next, check that the pressure setting on the Main Pressure Regulator is between 15 and 17 psi.
What to do if my CEM liberty Laboratory Equipment shows an Empty Amino Acid Bottle Error?
If your CEM Laboratory Equipment displays an 'Empty Amino Acid Bottle Error', you should: * Replace the empty bottle with a fresh reagent. * Ensure the bottle is securely connected to the manifold. * Replace the dip tube filter. * Perform a Sensor Calibration.
What to do if CEM liberty displays an Empty Activator, Activator Base, or Cleavage Bottle error?
If your CEM Laboratory Equipment shows an error for an empty activator, activator base, or cleavage bottle, try the following: * Replace the empty bottle with fresh reagent. * Make sure the bottle is not cracked. * Ensure the bottle is securely connected to the manifold. * Replace the dip tube filter. * Perform a Sensor Calibration.
How to resolve F1/F2 Restriction Error on CEM liberty Laboratory Equipment?
To resolve an F1/F2 Restriction Error on the CEM Laboratory Equipment, you can try the following: * Replace the F1 or F2 filter. * Replace the dip tube filter for the reagent being added.
Outlines safety precautions, hazard alerts (NOTE, CAUTION, WARNING), and general safety guidance.
Overview of initial setup steps for the Liberty instrument.
Guides on creating sequences and methods for peptide synthesis.
Instructions for preparing necessary solutions like amino acids and activators.
Final checks to ensure the Liberty is ready for operation.
General overview of daily, weekly, monthly, and semiannual maintenance tasks.
Covers pressure adjustment, leak checks, rotary valve tests, and sensor tests.
Lists common issues encountered with the Liberty and their possible resolutions.
General| Type | Microwave Peptide Synthesizer |
|---|---|
| Heating | Microwave |
| Reaction Vessel Sizes | 10 mL, 30 mL |
| Gas | Nitrogen |
| Frequency Range | 2450 MHz |
| Output Power | 300 W |
| Power Supply | 110-240V, 50/60Hz |
To Next Page
