CEM liberty - Options Menu; Program Options Tab

Liberty
™
Automated Microwave Peptide Synthesizer
600178 • Revision 5 • October 2009
83
Options Menu
The Options Menu can be accessed by clicking the Setup button from the PepDriver main screen
and selecting Options. The Options menu allows conguration of a number of important system
functions.
Program Options Tab
Method Options•
•
Test Sensors at Start: When this option is enabled, the Liberty will perform
a full Sensor Test before starting the rst method in the queue. This option is
enabled by default.
Automatic • Leak Check RV at Start: When this option is enabled, the
Liberty will perform a leak check of the reaction vessel before starting the rst
method in the queue. This option is enabled by default.
Automatic • Clean RV at Start: When this option is selected, the Liberty will
perform a reaction vessel cleaning step before starting the rst method in the
queue. This option is off by default.
NOTE
The default resin loading cycles include a reaction vessel cleaning step as
the rst step that is sufcient for routine operation of the Liberty.