CEM liberty - Section 5: Advanced Features; Default Cycle Editor; Changing Default Cycles

Liberty
™
Automated Microwave Peptide Synthesizer
600178 • Revision 5 • October 2009
82
Section 5: Advanced Features
Default Cycle Editor
The Default Cycle Editor is accessed by clicking the Setup button and selecting Default Cycle
Editor. The Default Cycle Editor allows the user to assign a default Amino Acid Cycle to each
amino acid. Different cycles can be assigned for different scales, allowing for the use of higher
power or more agitation at higher synthesis scales.
Changing Default Cycles
Open the Default Cycle Editor by clicking the Setup button and selecting Default 1.
Cycles.
Select a scale from the Scale pull-down menu.2.
Click on the cycle next to the an amino acid and select the desired cycle from the 3.
pull-down.
Click OK to save the new default cycles.4.