CEM liberty - Modifying an Existing Method

Liberty
™
Automated Microwave Peptide Synthesizer
600178 • Revision 5 • October 2009
38
Click on the drop-down box above the sequence and select the desired 8.2.
cycle. This will change the cycle for that highlighted amino acid only.
To change the cycle for all amino acids to the selected cycle, click Apply to 8.3.
All button on the left.
When the method is complete, click Save to save the method.9.
Modifying an Existing Method
Open the Method Editor.1.
Open the folder containing the method in the Methods window.2.
Click on the method to be modied. The sequence will automatically be selected 3.
and loaded.
Make any changes to the method as needed.4.
Click Save to save the changes to the method.5.
NOTE
Amino acids assigned cycles other than the default will be highlighted in
yellow in the Method Editor.