Need help?Do you have a question about the CEM EDGE and is the answer not in the manual?
General| Type | Microwave Digestion System |
|---|---|
| Max Temperature | 300 °C |
| Throughput | Up to 12 samples |
| Frequency Range | 2450 MHz |
| Cooling | Air Cooling |
Explains the meaning of NOTE, CAUTION, and WARNING alerts.
Recommends PPE and handling chemicals under a fume hood.
Details exhaust lines and general lab ventilation requirements.
Addresses safe disposal of hazardous waste produced by the instrument.
Identifies key components of the EDGE instrument.
Lists technical capabilities and limitations of the EDGE instrument.
Step-by-step guide for connecting bottles, rack, and power.
Instructions for positioning the autosampler fork and homing axes.
Procedure to check autosampler calibration using Q-Cup positions.
Steps to confirm waste calibration and vessel agitation.
Guide to adding new solvents, including name, max temp, and cooling temp.
Instructions for modifying existing solvent settings.
Steps to remove solvents and assign them to bottle positions.
Steps to unassign a solvent from a bottle position.
Recommended setting for preheating the vessel chamber.
Explains Classic/One Touch methods and how to copy them.
How to change method name and activate/deactivate wash.
Procedures for adding or deleting cycles within a method.
Steps to define solvent, volumes, ramp, and hold times.
How to set up solvent and volume for washing.
Procedure to prime the instrument lines before running samples.
Steps for selecting, loading, running methods, and assigning sample IDs.
Outlines what is covered, not covered, and purchaser responsibilities.
Information on obtaining service and warranty disclaimers.
To Next Page
