Liberty
™
Automated Microwave Peptide Synthesizer
600178 • Revision 5 • October 2009
41
meq/g.
Click Calculate. The required mass of resin will be reported in the Grams of 3.
Resin box (in grams).
Deprotection Calculator
Click on the desired deprotection reagent from the list.1.
Enter the desired concentration (in percent volume).2.
Enter the total volume of deprotection solution required.3.
Click Calculate. The calculator will report the required amount of deprotection 4.
reagent in milliliters (for liquids) and grams (for solids).
Activator Base Calculator
Click on the desired base from the list.1.
Enter the desired concentration (in M)2.
Enter the total volume of activator base solution needed.3.
CAUTION
The default concentration is 20%. Piperazine should be prepared at a 5%
solution due to its solubility in DMF.
CAUTION
The default concentration is 2 M. DIEA should be prepared using NMP as
the solvent because of its miscibility in DMF.
To Next Page
