23
NOTE
The selected solvent must be assigned in bottle setup. If you attempt to save a method using
a solvent that is not assigned in bottle setup, a “Bottle Setup Missing Solvent” error will
display. Refer to the Bottle Setup section in this manual to properly assign a solvent for the
Bottle Setup.
5.4
Select the text box for Top Volume.
5.5 Using the keypad, enter the desired volume and select “Enter.”
CAUTION
A maximum volume of 10 mL can be used for Bottom Volume.
5.6 Select the text box for Bottom Volume.
5.7 Using the keypad, enter the desired volume and select “Enter.”
To Next Page
Loading...
