Center 261 - DCV Measurement

TRMS AC/DC Low Current Clamp Meter
10

INCORRECT

CORRECT
6-3 DCV measurement
：
WARNING!
Maximum Input Voltage is 660V AC/DC. Do not
attempt to take any voltage measurement that may
exceed this maximum to avoid electrical shock hazard
and/or damage to this instrument.
Switch the main
function selector
to DCV range.
Connect red test
lead to “
”
terminal and black
one to the “COM”
terminal.
Measure the
voltage by touch
the test lead tips
to the test circuit
where the value of
voltage is needed.
Read the result
from the LCD
panel.