TRMS AC/DC Low Current Clamp Meter
2
2. GENERAL SPECIFICATION
Digital Display:
4 digital liquid crystal (LCD), maximum reading 6000.
Polarity:
When a negative signal is applied, the
signal appears.
Low Battery Indication:
When the battery is under the proper operation range,
will appear on the LCD display.
Sample Rate:
2 times/sec for digital data.
Power Source:
1.5V size AAA alkaline battery X 2
Typical battery Life: (without backlight)
30 hours at current function.
60 hours at other functions.
Auto Power Off:
If there is no key or dial operation for 30 minutes, the meter
will power itself off to save battery consumption. This function
can be disabled by press and hold the “HOLD” button then
power the unit on.
Over Load:
When the signal larger than the maximum will be shown
.
Maximum jaw opening:
20 mm
Dimensions:
232 x 72 x 35 mm
Weight:
230g (with battery)
Accessories:
Carrying case, batteries, test lead & instruction manual.
To Next Page
Loading...
