TRMS AC/DC Low Current Clamp Meter
15
8. MAINTENANCE
WARNING!
Before opening the meter, disconnect both test lead and
never uses the meter before the cover is closed.
CAUTION!
To avoid contamination or static damage, do not touch
the circuit board without proper static protection.
8-1 REMARK:
If the meter will not be used for a long time, remove the
battery and do not store the meter in high temperature or
high humidity environment.
When taking current measurement, keep the cable at the
center of the clamp will get more accurate test result.
Repairs or servicing not covered in this manual should be
performed only by qualified personal.
8-2 CLEANING:
Periodically wipe the case with a dry cloth. Do not use
abrasives or solvents on these instruments.
To Next Page
Loading...
