Cessna T188C - Page 44

MODEL 188
& T188 SERIES
SERVICE
MANUAL
(i)
ENGINE
RUN-UP
Before
beginning
the step-by-step
inspection,
start,
run-up and
shut down
the engine in
accordance
with
instructions
in the Information
Manual.
During
the
run-up,
observe
the
following,
making
note
of any
discrepancies
or
abnormalities:
1. Engine
temperatures
and
pressures.
.2.
Static RPM.
(Also
refer to Sections
11,A,
and 11B
of this
Manual.)
3. Magnito Drop.
4. Engine
response
to changes
in power.
5. Any unusual engine noises.
6. Fuel selector
and/or shut-off valve;
operate engine on each
tank (or cell) position
and OFF
position long enough
to ensure shut-off andor
selector valve functions
properly.
7. Idling speed and mixture; proper idle cut-off.
8.
Alternator
and
ammeter.
9.
Suction
gage.
10. Fuel
flow indicator.
(if equipped).
After the
inspection
has been completed,
an engine
run-up should
again be
preformed
to ensure
that
any descrepancies
or abnormalities
have been corrected.
2- 22
Temporary
Revision
2 - Oct 3/94