CH P1 - SHORTCUTS Menu; FACTORY SETTINGS Menu

7.3 SHORTCUTS menu
PARAMETER PARAMETER VALUES REMARKS
SHORTCUT 1 Any Parameter of the AUDIO
SETTINGS and DISPLAY SETTINGS
menus or None
If SHORTCUT 1 is not defined, Parameter value for SHORTCUT 1 is
set to 'None'. SHORTCUT 2 to 6 are not displayed in this case.
SHORTCUT 2 Any Parameter of the AUDIO
SETTINGS and DISPLAY SETTINGS
menus or None
If SHORTCUT 2 is not defined, Parameter value for SHORTCUT 2 is
set to 'None'. SHORTCUT 3 to 6 are not displayed in this case.
SHORTCUT 3 Any Parameter of the AUDIO
SETTINGS and DISPLAY SETTINGS
menus or None
If SHORTCUT 3 is not defined, Parameter value for SHORTCUT 3 is
set to 'None'. SHORTCUT 4 to 6 are not displayed in this case.
SHORTCUT 4 Any Parameter of the AUDIO
SETTINGS and DISPLAY SETTINGS
menus or None
If SHORTCUT 4 is not defined, Parameter value for SHORTCUT 4 is
set to 'None'. SHORTCUT 5 and 6 are not displayed in this case.
SHORTCUT 5 Any Parameter of the AUDIO
SETTINGS and DISPLAY SETTINGS
menus or None
If SHORTCUT 5 is not defined, Parameter value for SHORTCUT 5 is
set to 'None'. SHORTCUT 6 is not displayed in this case.
SHORTCUT 6 Any Parameter of the AUDIO
SETTINGS and DISPLAY SETTINGS
menus or None
If SHORTCUT 6 is not defined, Parameter value for SHORTCUT 6 is
set to 'None'.
7.4 FACTORY SETTINGS menu
PARAMETER RELATED ACTION/VALUE REQUIRED OPTIONS REMARKS
FIRMWARE VERSION Firmware version None Firmware version indicates the version of the
current firmware. Format is x.y. This parameter is
read only.
UPDATE FIRMWARE Update None Selecting 'Update' launches the P1 firmware update
process. A USB flash disc drive with a valid set of
firmware must be inserted in the A-shaped USB port
RESET ALL SETTINGS Reset None Selecting 'Reset' returns the P1 to its factory
settings.
SERIAL NUMBER Serial number None Serial number indicates the serial number of the P1.
This parameter is read only.
SHORTCUTS Default mapping None Selecting 'Default Mapping' returns the P1's
Shortcuts to their factory settings. Factory settings
are detailed in the Specifications section.
INPUT GAIN Set default gain None Set back the gains to minimal values.
28 P1 User Manual Rev 1.1