65
GB
product description
Visible symbols with solar heating
system and/or heat pump installed:
- (
) Boiler
- (
) Boiler operating
- ( ) Cooling
- ( ) Under-fl oor heating system
- (
) Single-coil indirect cylinder
- (
) Double-coil indirect cylinder
- (
) Solar-electric indirect cylinder
- (
) Solar collector
- (
) Circulation pump
- (
) Heat exchanger
- (
) Diverter valve
- (
S1) Collector sensor
- (
S2) Low indirect cylinder sensor
- (
S3) High indirect cylinder sensor
- (
S4) Under-fl oor heating system
thermostat
- (
) Indirect cylinder overheating
- (
) Collector overheating
- (
) Anti-frost function
- (
) Thermal Cleanse Function
- (
) Recooling function
- (
) Digital display format
- (
) Analogue display format
- (
) Confi gurable device
- (
) Heat pump
- (
) Heating element 1
- (
) Heating element 2
- (
) Heating element 3
- (
) Heating element excluded
- (
) Sanitary comfort in the period
Initial start-up
The fi rst time the EXPERT CONTROL system
interface is connected, the user is required
to choose certain basic settings.
First, you will need to select the user inter-
face language.
Turn the knob and select the desired lan-
guage, then press the OK button to confi rm.
Move on to setting the date and time. Turn
the knob to make a selection, press the OK
button to confi rm your selection, turn the
knob to set the value.
Press the OK button to confi rm.
Save the settings by pressing OK.
Press the OK button to access the Menu.
Use the knob in the centre to scroll through
the menu list and select a parameter, then
press OK to confi rm.
CAUTION
Some parameters are protected with an ac-
cess code (safety code) which protects the
boiler settings from unauthorised use.
reduced fare
- (
) Sanitary comfort in the period
reduced fare and a setpoint
reduced to 40 ° C during the
period at full fee
- (
) BOOST mode
- (
) Silent mode
- (
) Special functions
- (
) Hybrid mode operation
To Next Page
Loading...
Need help?
General
