69
GB
room temperature adjustment
Modifying the room temperature
Scheduled room temperature adjustment pro-
gramming
Depending on the chosen operating mode,
programmed or manual.
Room temperature adjustment in ma-
nual mode
Turn the knob to set the desired room tem-
perature value. The display will visualise the
set value.
Press the OK button to confi rm.
The display returns to the previous visuali-
sation.
Scheduled room temperature adjust-
ment programming
During operation in scheduled programming
mode, the set room temperature can be
changed temporarily.
Turn the knob to set the desired room tem-
perature value. Press the OK button.
The display shows the set temperature and
the time at which you want the change to
end.
Turn the knob to set the change end time
and press the OK button to confi rm.
The display shows the symbol “
” along-
side the desired temperature value set for
the change period.
Press the back button “
“ to exit adjust-
ment without saving the changes.
The EXPERT CONTROL system interface will
maintain the temperature value until the end
of the set time period, when the pre-set
room temperature is restored.
To Next Page
Loading...
Need help?
General
