FY –33VC Operation manual
- 15 -
8. Electric tank: Used to settle circle board
9. Main Ink tanks：Total C, M, Y, K 4 colors, 1000ml/color
10 Waste Ink Tank： Collect the waste ink during cleaning
11. Media Auto-feeding sensor： Control media feeding motor running
12. Media feeding motor：Roller driver
13. Media Feeding Roller： Hold media for printing
14. Media Feeding System Switch：Make media feeding roller turn forward or backward
15. Media Feeding Manually/Automatically Switch：Manually control or automatically control or shut down
media feeding motor.
16. Press Roller：Press media and make media smoothly
17. Clamp：Manually adjust media width
18. Flash Protector Frame：Prevent ink splash
19. Print Interface：USB2.0 interface or connect to data card in computer
20. Power Socket：Provide power for printer
21. Heating Power Socket: Provide power for heater
22. Heater Protective switch：Prevent electric leakage of heating board
23. Ink pump: provide ink to sub ink tank
24. Ink filter: Filtrate impurity in ink.
25. Valve: Automatically control the air route
26. Air pump: Compress air as positive cleaning the print head.
27. Assistant ink tank: Store ink.
28. Safety tank: Store air. Prevent ink leak out while float switch inside sub ink tank is broken.
29. Tube clamp: manually control the air route
30. Reset button: Stop alarming of ink lacking in assistant ink tank
31. Positive clean button: Control starting and process of positive pressure clean
32. Lighten: Lighten for checking the print head status
To Next Page
Loading...